Anmol Chemicals is the pioneer manufacturers of Polyvinyl Acetate, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Polyvinyl Acetate made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Polyvinyl Acetate is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ---------- Contact

Drum PackingPalletized Drum PackingExport Big BagsPalletized & Shrink Wrapped. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Polyvinyl Acetate Manufacturers

Polyvinyl Acetate BP, FCC Food Grade & Pure Manufacturers

YOU ARE HERE: Specifications of Polyvinyl Acetate BP FCC Food Grade Manufacturers

SDS GHS MSDS Sheet of Polyvinyl Acetate

Poly(vinyl acetate) BP Grade
Ph Eur

Poly(vinyl acetate) is a thermoplastic polymer obtained by polymerisation of vinyl acetate using a suitable starter, without solvent or with water or 2-propanol. The vast majority of the acetate moieties are attached to non-neighbouring carbon atoms of the chain. The index n is about 100 - 17 000. The relative molecular mass lies between 10 000 and 1500 000. The viscosity is 4 to 250 mPa·s. The ester value, which characterises the degree of hydrolysis, is 615 to 675.

Appearance: White or almost white powder or colourless granules or beads.
Solubility: Practically insoluble in water, freely soluble in ethyl acetate, soluble in alcohol. It is hygroscopic and swells in water. It softens at temperatures above 40-50°C.
A. Infrared absorption spectrophotometry. To pass the test.
B. It complies with the test for viscosity (see Tests).
C. Saponify 0.500 g in a mixture of 25.0 ml of 0.5 M alcoholic potassium hydroxide and 25.0 ml of water. The solution obtained gives the reaction of acetates.

Solution S: Suspend 50.0 g in 100 ml of ethyl acetate R in a borosilicate glass flask with a ground-glass neck. Heat under a reflux condenser with constant stirring for 30 min. Allow to cool. Filter through a tared sintered glass filter (16) (2.1.2) and wash the residue with 50.0 ml of ethyl acetate, pour the filtrate into a 250 ml graduated flask. Dilute to 250 ml with ethyl acetate.
Appearance of solution: Solution S is clear and colourless.
Viscosity: 85 per cent to 115 per cent of the value stated on the label.
Determine the viscosity immediately after preparation of solution S at 20 ± 0.1 °C by using a rolling ball viscosimeter.
Acid value
: Maximum 2.0, determined on 5.0 g dissolved in 50 ml of alcohol by shaking for 3 h.
Ester value: 615 to 675.
Saponify 0.500 g in a mixture of 25.0 ml of 0.5 M alcoholic potassium hydroxide and 25.0 ml of water.
Residual peroxides: Maximum 100 ppm, calculated as hydrogen peroxide.
Vinyl acetate: maximum 0.3 per cent to meet the test.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 °C.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.

The label states:
— the nominal relative molecular mass;
— the viscosity.

Polyvinyl Acetate FCC Food Grade
CAS: [9003-20-7]

Polyvinyl Acetate occurs as a clear, water white to pale yellow, solid resin. It is prepared by the polymerization of vinyl acetate. After completion of polymerization, the resin is freed of traces of residual catalyst (usually a peroxide), monomer, and/or solvent by vacuum drying, steam sparging, washing, or any combination of these treatments. The resin is soluble in acetone, but it is insoluble in water.
Function: Masticatory substance in chewing gum base.

Identification: The infrared absorption spectrum of a melted sample on a potassium bromide plate exhibits relative maxima at the same wavelengths as those of a typical spectrum as shown in the section on Infrared Spectra, using the same test conditions as specified therein.
Free Acetic Acid: Not more than 0.05%.
Lead: Not more than 3 mg/kg.
Loss on Drying: Not more than 1.0%.
Molecular Weight: Not less than 2000.

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.


Anmol Chemicals
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264


Anmol Chemicals

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.

Copyright and Usual Disclaimer is Applicable. 3 March, 2016

Manganese Gluconate

Copper Gluconate

Guar Gum

Glacial Acetic Acid

Manganese Chloride

Magnesium Oxide

Polyvinyl Acetate